Sometimes a situation may arise where a master reset of the control board on the Fleck 5600SXT control valve will be necessary. Performing a master reset will restore the original factory settings.
Control Valve Buttons
The Fleck 5600SXT controller has three buttons on the front that you need to be familiar with: Next cycle button - acts as enter button, up botton, down button
- unplug the softener power cable from the wall outlet
- press and hold the 'next cycle' button on the controller and hold this button down while the power cable is plugged back in
- continue to hold the 'next cycle' button for three seconds and then release it